Special Primers & Pre-Treatments

Adhesion and protection are the most significant properties of a paint coating. Some substrates require special consideration when deciding on what primer to use, difficult surfaces like galvanized steel and aluminium may cause problems if not treated correctly.

Our etch primers and T-Wash solution prove an excellent base to promote the adhesion of subsequent coatings. For enhanced performance in harsh conditions our 2 pack epoxy primers provide excellent protection to steel fabrications. Combining epoxy resin with zinc phosphate anti-corrosive pigments, these coatings provide better corrosion performance than conventional primers. Our single pack zinc rich primer gives the excellent level of protection you would expect from a galvafroid-type paint containing over 90% zinc metal in the dry film.

Product Name: Single Pack Epoxy Zinc Rich Primer
Recommended Use: As a high performance anti-corrosive primer and touch up for galvanized surfaces.
Touch Dry / Cure: 15-20 minutes@60°C
Colour Range: Mid grey primer finish.
Finish:
Special Purpose:
Price:

Request Information

Product Name: 2 Pack Epoxy Zinc Phosphate Grey Primer
Recommended Use: As a high performance anti-corrosive primer and touch up for galvanized surfaces.
Touch Dry / Cure: 1-2 hours
Colour Range: Mid grey primer finish.
Special Purpose: 2 Pack Epoxy primer systems provide paints with excellent corrosion performance for use where extra protection is required on steel structures, The addition of zinc phosphate anti corrosive pigments enhances the level of protection further.
Price:

Request Information

Product Name: Single Pack Light Grey Etch Primer
Recommended Use: As a high performance anti-corrosive primer and touch up for galvanized surfaces.
Touch Dry / Cure: 15-20 minutes@60°C
Colour Range: LIGHT GREY, WHITE, BLACK
Special Purpose: As an adhesion promotion primer onto difficult substrates typically aluminium, galvanized or polished steel. This product chemically etches into the surface to produce a well bonded coating suitable for subsequent coats of paint.
Price:

Request Information

Used as a pre-treatment for galvanized surfaces to ensure the subsequent adhesion of a designated coating system.

Simply brush or wipe onto the surface, wait for substrate to react with the surface and change colour, wash and allow to dry before applying paint

Request Information